HP Type hydro-pneumatic presses
Your selected press: HP 5000 HV 10/50
(Round ram, Type: HP)
 |
Capacity [kN]: | 42 |
Total Stroke [mm]: | 50 |
Working Stroke [mm]: | 10 |
Throat [mm]: | 150 |
Troat [mm]: | 0 |
Table size CxD [mm]: | 305 x 210 |
T-slot [mm] similar to DIN 650: | 14 |
Ram bore Øxdepth [mm]: | 20H7 x 34 |
Ram Ø [mm] / Surface F [mm²]: | 40 |
Space required CxG [mm]: | 305 x 440 |
Weight [kg]: | 163 |
catalogue page: | Download |
|
Item No.: |
Description: |
Daylight (min): |
Daylight (max): |
Overall dimensions (PDF): |
3D file (STEP): |
|
6-050-I-6540 |
HP 5000 HV 10/50 |
119 |
320 |
Download |
ask for |
 |
|
The return travel lock rules out partial strokes and therefore incomplete operations. Forming, assembly and joining operations are always reliably and completely executed, as the return stroke of the press is blocked on the
downward stroke. An effective contribution to quality assurance.
As toggle presses do not achieve their maximum force until BDC, adjusting the height of the press head by means of the threaded spindle is often too inaccurate. The precision ram adjustment enables the press pressure point to be precisely set directly at the ram. The scale on the adjustment ring enables the fine setting to be read off to 0.02 mm. The adjustment range is ±1.5 mm.
The precision ram adjustment is used when the utmost precision is required for
the press depth. Ideal for prototype manufacture and serial production when accurate and easy adjustment within the tolerance range is required.
The bottom part of the tool can be mounted in the centric table bore. Fixing is by means of a transverse screw in all models up to 80 mm throat. The table bore enables the tool to be changed quickly and reduces set-up time. The alignment accuracy of the ram bore with the table bore is <0.05 mm.
This option is available for all manual presses or for other presses on demand.
A rapid overview of the number of items produced can be obtained with the five-digit stroke counter. The number of items can be reset.
The micrometer stop is used with rack and pinion presses for high-precision assembly work or for when the tool has to be accurately positioned. This enables the press stroke length to be accurately adjusted to 0.01 mm
mäder hydropneumatic presses are initially driven by compressed air only and activate the hydraulic power stroke automatically. They combine the advantages of pneumatic and hydraulic presses. In the pneumatically driven fast stroke, the workpiece is approached rapidly with low force. The hydraulic power stroke is then activated automatically when resistance is encountered.
Because of this, the applied energy is used to the most economic effect particularly in these models.
Hp type hydro-pneumatic presses are availble in various sizes with capacities from 30 kN up to 100 kN and throatds from 100 mm to 300 mm.
All hydropneumatic presses are available as an automation module or can be supplied with mäder controls for individual workstations..
The round ram of mäder pressen is characterized by high sturdiness, ground surface and precise ram bore. Tools can be fixed securely in the ram bore by means of a fixation screw. Round rams of mäder pressen are either guided in precision honed bores or in precise Teflon bushings.
Quality features:
- Anti-twist, hardened ram
- Long, honed ram guide for maximum precision
- Two power stroke lengths provided as standard
- Simple adjustment of the height of the press head using
a threaded spindle and right-angle gearbox
- Side-mounted measuring strip for fast reproduction of
settings when changing the tool
- Low noise: less than 75 dB