DA Type direct acting presses:
Your selected press: XL-DA 2100-40-300
(Round ram, Type: DA)
 |
Capacity [kN]: | 21 |
Total Stroke [mm]: | 40 |
Working Stroke [mm]: | 0 |
Throat [mm]: | 300 |
Troat [mm]: | 130 |
Table size CxD [mm]: | 200 x 220 |
T-slot [mm] similar to DIN 650: | 14 |
Ram bore Øxdepth [mm]: | 20H7 x 25 |
Ram Ø [mm] / Surface F [mm²]: | 40 |
Space required CxG [mm]: | 200 x 550 |
Weight [kg]: | 141 |
catalogue page: | Download |
|
Item No.: |
Description: |
Daylight (min): |
Daylight (max): |
Overall dimensions (PDF): |
3D file (STEP): |
|
5-021-04-4710 |
XL-DA 2100-40-300 |
130 |
275 |
Download |
ask for |
 |
|
The return travel lock rules out partial strokes and therefore incomplete operations. Forming, assembly and joining operations are always reliably and completely executed, as the return stroke of the press is blocked on the
downward stroke. An effective contribution to quality assurance.
As toggle presses do not achieve their maximum force until BDC, adjusting the height of the press head by means of the threaded spindle is often too inaccurate. The precision ram adjustment enables the press pressure point to be precisely set directly at the ram. The scale on the adjustment ring enables the fine setting to be read off to 0.02 mm. The adjustment range is ±1.5 mm.
The precision ram adjustment is used when the utmost precision is required for
the press depth. Ideal for prototype manufacture and serial production when accurate and easy adjustment within the tolerance range is required.
The bottom part of the tool can be mounted in the centric table bore. Fixing is by means of a transverse screw in all models up to 80 mm throat. The table bore enables the tool to be changed quickly and reduces set-up time. The alignment accuracy of the ram bore with the table bore is <0.05 mm.
This option is available for all manual presses or for other presses on demand.
A rapid overview of the number of items produced can be obtained with the five-digit stroke counter. The number of items can be reset.
The micrometer stop is used with rack and pinion presses for high-precision assembly work or for when the tool has to be accurately positioned. This enables the press stroke length to be accurately adjusted to 0.01 mm
DA presses are the logical implementation of modern press technology for direct-acting pneumatic presses. Due to their modular design, exactly the size needed for the application can be selected, thus optimising the
price/performance ratio.
DA type direct acting pneumatic presses are available in various sizes with capacities of 1,5 kN - 34 kN and throats up to 300 mm. Standard stroke lengths from 40 mm to 120 mm are
available in 20 mm steps.
Adjusting the stroke of DA presses:
DA presses are fitted as standard with an innovative, precise
and easy-to-use system which enables accurate stroke adjustment
and protects the ram against twisting.
Operation:
- The press depth can be adjusted to a reading accuracy of
0.01 mm over maximum 80mm of the stroke length with only one scale
nut. The stroke length can be read off using the side
scale and the vernier on the scale nut.
- The position of the ram can be checked by means of reed
contacts which are slid onto the standard scale.
- The sensors do not have to be readjusted when the stroke
length is changed, as the stroke length control magnets
always move to the same end positions.
Tandem cylinders
The energy-efficient tandem cylinder design is used for larger
forces from 8,5 kN on. Several pneumatic cylinders are connected in tandem
thus increasing the force of the cylinder accordingly. The air
consumption is optimised, as the return stroke is only via one
cylinder chamber. The press can be operated using only two
air connections, as the air is channelled within the pneumatic
cylinder.
All direct acting pneumatic presses are available as an automation module or can be supplied with mäder controls for individual workstations..
The round ram of mäder pressen is characterized by high sturdiness, ground surface and precise ram bore. Tools can be fixed securely in the ram bore by means of a fixation screw. Round rams of mäder pressen are either guided in precision honed bores or in precise Teflon bushings.
Quality features:
- anti-twist protected ran
- Right-angled gearbox for simple height adjustment of the
press head
- Side-mounted measuring strip for fast reproduction of
settings when changing the tool
- Practically maintenance-free double-acting cylinder
- Adjustable cylinder end-position damping
- Low noise: less than 75 dB
A larger throat is required wherever bulky parts are processed, e.g. the processing of printed circuit boards, sheet metal and similar parts. mäder XL presses with 250 mm throat are employed in such cases.
The base is a stable welded structure to which different standard press heads can be fitted.